Basic Uses: Its fast cure time and easy tooling make it ideal for many in-house production applications; and it is non-corrosive to most building materials such as glass (including insulating glass), tiles, and sanitary equipment. CRL RTV408 seals curtainwall joints; vinyl, steel and aluminum windows; and skylights. It is also used in vehicles, ships, aircraft, as well as for electrical insulation. CRL RTV408 does not cause corrosion in contact with metals. It is suitable for alkaline materials such as mortar and cement, and other applications where metal corrosion could be a problem. CRL RTV408 stays flexible and is resistant to cracking or becoming brittle in a wide range of temperatures approximately -65° to 400°F (-54° to 204°C). It can be applied at outdoor temperatures as low as -20°F (-29°C), provided that surfaces are clean, dry and frost-free, or on surfaces as high as 100°F (38°C). RTV408W and RTV408T contain a fungicide, and the cured sealant is mildew resistant.
Limitations: It is not recommended for concrete and stone expansion joints; horizontal decks, patios, driveway or terrace joints where abrasion or physical abuse is encountered; sealing submerged joints, particularly where porous surfaces permit water infiltration to the bond surface; interior or exterior structural sealing below the waterline in marine applications; structural glazing; food contact or potable water applications; mirrors. Check cartridge label and Specification Data Sheet for additional limitations.
Dap: Titanium®. Dow Corning®: 799 Contractors Weatherproofing, Vinyl Window, Siding & Door. GE®: 2800 Silglaze II Contractors-N 1800. Tremco®: Tremsil 600, TremPro 645. OSI: VP-275. Pecora®: 896. Novagard®: Novaflex. Sika®: SikaSil®-N Plus.
Technical Data: Meets or exceeds Federal Specifications: TT-S-001543A (COM-NBS) Class A, for silicone building sealants; TT-S-00230C (COM-NBS) Class A, for one-component silicone sealants; ASTM C-920 for elastomeric joint sealants, Type S, Grade NS, Class 25, Use NT, G, A and O; CAN/CGSB 19.13-M87. AAMA 802.3-92 Type I, 802.3-92 Type 2, 805.2-94 and 808.3-92. Meets California Air Resources Board 2003 requirements for Volatile Organic Compound (VOC) content. Qualifies for LEED® (Leadership in Energy and Environmental Design) Green Building Rating System™ credit.