C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home

View Larger Image

Catalog Number: V220414

  • Structural Glazing Spacer for Field and Shop Glazing

  • Superb Spacer for Two and Four Sided Structural Silicone Glazing Systems

  • Chemically Compatible with All Silicones Tested
  • Black Color

  • CRL V2200 Thermalbond® Tape is a semi-rigid foam tape with an aggressive pressure-sensitive adhesive. This high density tape has a specially formulated cellular substrate, and is used as a spacer for joint dimension control in structural silicone glazing systems. It is the most widely used spacer tape for structural silicone systems.

    Norton® 1/8" x 1/4" V2100 ThermalBond® Structural Glazing Spacer Tape


    Other Products/Finishes/Sizes:

    12N125SFPS CRL-U.S. Aluminum #12 x 1-1/4" Flat Head Phillips Assembly Screws
    12NWFS2Z CRL-U.S. Aluminum 1/4-20 x 2" Bolt Assembly with Washers and Nut for DHS-500 Series Storm Front™
    ACE1013 CRL-U.S. Aluminum E.P.D.M. Glazing Gasket- 300'
    BCE475A CRL-U.S. Aluminum Flat Filler 2-1/2" Long, Used at Anchor Locations
    V220414 Norton® 1/8" x 1/4" V2100 ThermalBond® Structural Glazing Spacer Tape

    Catalog Number:V220414
    Also Available in These Catalogs:
    USAL15 U.S. Aluminum Curtain Wall Catalog, PAGE 07M2
    Length:50' (15 m)
    Ship Via:Can Ship UPS

    V2100 has proven to be compatible with all commercial silicone sealants used for structural glazing. It has a highly aggressive adhesive on both sides, and a semi-rigid, open cell structure that maintains the required spacing, and allows air and moisture to reach the silicone to allow optimum curing. Its low conductivity reduces heat transfer and inhibits condensation on windows, doors, and metal systems.

    V2100 Tape is designed as a spacer for glass, metal, stone, mineral cement, and plastic panels in structural silicone glazing systems. This includes: two and four sided structural silicone glazing of curtain walls, storefronts, skylights and windows; to temporarily secure glazing or panels to framework in shop fabrication of unitized structural silicone glazing and cladding systems; to temporarily secure lightweight veneers to substrates while permanent structural silicone adhesives are curing; as a thermal break to reduce the conduction of heat; to provide an even sight line in vision areas. It is stocked only in an architectural black finish (other colors available on special order), and in nine stock sizes. Other sizes are also available on special order.

    NOTE: Thermalbond® V2100 is a SPACER material and not intended to be a structural component. The adhesive properties cannot be used as part of the permanent fastening system or in any way to reduce the amount of silicone adhesive recommended by the silicone manufacturer. Contact surfaces must be thoroughly cleaned. Position V2100 carefully, as it cannot be repositioned after initial contact. With some surfaces, it may be necessary to prime the surface with Norton Tite-R-Bond Adhesion Promoter.

    Typical Properties
    Density: 31 lbs./cu.ft. (497 kg/m³); Hardness: 35 durometer Shore A; Force to Compress 10%: 31 psi (214 (kPa); Tensile Strength: 180 psi (1241 kPa); Elongation: 125%; Temperature Range: Application 60°F (16°C) to 125°F (52°C); Service -40°F (-40°C) to 180°F (82°C).

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.

    No related items.