C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF

View Larger Image

Catalog Number: ADRB120

  • The Fastest Cutting Router Bit We Have Ever Offered

  • New Design Removes More Material

  • CRL 1/8" Diamond Router Bits is the fastest cutting router bit we've ever offered. The design comes from years of engineering experience in the world of glass routing, and has revolutionized glass routing as it is known today. With this bit and our ADR2 or ADR2T Portable Glass Router, speeds of up to 7" (178 mm) per minute can easily be achieved while routing in 1/4" (6.35 mm) glass. This is more than twice the speed of our previous bit! The secret of the bit is two coolant "flats" that are ground into the 1/8" (3.17 mm) diameter part of the shaft. They allow more material to be removed at a faster rate, and provide a space for twice the volume of coolant to be supplied to the cutting area. If properly used you can expect to get over 50 linear feet of routing per bit. Another amazing feature about this bit is that it costs about 50% less than our current router bits. If you're using the CRL ADR2, ADR2T, PDR or Wedge-LockĀ® Router Systems, then we recommend you try this bit.

    CRL 120 Grit 1/8" Diamond Router Bit


    Other Products/Finishes:

    ADRB120 CRL 120 Grit 1/8" Diamond Router Bit
    ADRB40 CRL 40 Grit 1/8" Diamond Router Bit
    SFRB14220 CRL 220 Grit 1/4" Seam and Flat Diamond Plated Router Bit

    Catalog Number:ADRB120
    Also Available in These Catalogs:
    CRL73R Tools, Machinery, and Equipment, PAGE 173K
    CRL53R Glass & Glazing Catalog, PAGE 199G
    CRL23R Frameless Shower Door and Mirror Hardware, PAGE 535J
    GG2014A European Glass & Glazing, PAGE TE028
    Length:2-1/4" (57 mm)
    Overall Diameter:1/4" (6.35 mm)
    Ship Via:Can Ship UPS
    Shipping Weight:2 oz (45g)

    No additional product information available at this time.

    Always wear the proper safety gear including protective eyewear when routing. Wet working tools should always be used with a Ground Fault Circuit Interrupter Cat. No. GF1. Failure to follow these and other recommended precautions can result in injury.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.