C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home

Catalog Number: JRG344CH

  • Wall Mount Offset Back Plate (Allows Clean Sight Line From Shower Exterior)

  • Adjustable to Any Angle Up to 90 Degree without Having to Take Door Down

  • 3 Year Warranty

  • The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer flexibility of application. Used to accommodate 1/4" (6 mm) to 5/16" (8 mm) thick glass, the Junior Geneva is made of solid brass. Fully adjustable to accommodate the desired angle (up to 90 degree) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closing position. The door can swing 90 degree inward and 90 degree outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb.

    CRL Chrome Junior Geneva 344 Series Adjustable Wall Mount Offset Back Plate Hinge


    Other Products/Finishes/Sizes:

    Catalog Number:JRG344CH
    Also Available in These Catalogs:
    EUR This item is currently only available in Europe and surrounding areas, PAGE EUR
    Ship Via:Can Ship UPS
    Shipping Weight:1 lb (454g)

    Using two hinges with 1/4" to 5/16" glass (6 to 8 mm) the hinge will hold up to 62 lbs. (28 kg) with a maximum door width of 28" (711 mm).

    Using three hinges with 1/4" to 5/16" glass (6 to 8 mm) the hinge will hold up to 92 lbs. (42 kg) with a maximum door width of 32" (813 mm).

    Glass Thickness: 1/4" (6 mm) to 5/16" (8 mm) Tempered Safety Glass
    Special Features: Adjustable to any angle up to 90 degree without having to take door down
    Construction: Solid Brass
    Hinge Swings: 90 degree in and 90 degree out (at factory set position)
    Closing Type: Self-Centering when within 15 degree of closed position
    Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions

    NOTE: Door glass width may require alteration from standard clearance deductions when adjusting angles.

    CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department. Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.