C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home


View Larger Image

Catalog Number: CRL7672


  • Spindle Set in the Diamond Position at 0º

  • Replace Existing Pre-1998 Original Kawneer® Husky® Closers

  • 5 Year Limited Warranty
  • UL Listed
  • Warranty Information and Cross Reference Chart Available

  • This CRL Overhead Concealed Door Closer incorporates a spindle set in the diamond position, instead of a square position, at 0º. This enables door installers to replace existing pre-1998 Kawneer® original style Husky® Door Closers without the need to change the door arm, which requires a diamond pattern spindle engagement. With the addition of our Retrofit Clips for either 4" or 4-1/2" (102 or 114 mm) optional headers, the existing door closer can be replaced without the need to replace any additional door hardware. The existing Center-Hung or Offset Arms can be used, as well as the existing pivot.



    CRL Diamond Style Spindle A.D.A. 8.5 Lb. Exterior 105º No Hold Open Retrofit Overhead Concealed Closer Body Only


     


    Other Products/Finishes/Sizes:

    CATALOG NUMBER DESCRIPTION
    CRL7670 CRL Diamond Style Spindle A.D.A. 8.5 Lb. Exterior 105º Hold Open Retrofit Overhead Concealed Closer Body Only
    CRL7672 CRL Diamond Style Spindle A.D.A. 8.5 Lb. Exterior 105º No Hold Open Retrofit Overhead Concealed Closer Body Only
    CRL7770 CRL Diamond Style Spindle Medium Duty 105º Hold Open Retrofit Overhead Concealed Closer Body Only
    CRL7772 CRL Diamond Style Spindle Medium Duty 105º No Hold Open Retrofit Overhead Concealed Closer Body Only

    Catalog Number:CRL7672
    Also Available in These Catalogs:
    CRL63A Architectural Hardware Master, PAGE 460H
    CRL83R Door and Window Replacement, PAGE 701W
    CRL93A Architectural Hardware, PAGE CH172
    DC14 Door Controls Catalog 2014, PAGE D343
    AH11 Architectural Hardware Catalog 2011, PAGE Z690
    Spring Size:A.D.A. - 8.5 Lb.
    Door Size (Width):36" to 48" (914 mm to 1.22 m)
    No Hold Open:105º
    Ship Via:Can Ship UPS
    Shipping Weight:10 lb (4.54kg)
    Case Qty:6

    These Overhead Concealed Door Closers are available in 105º Hold Open and No Hold Open styles, with Medium Spring Size, and an 8.5 lb. model for A.D.A. exterior door applications. A diamond pattern End-Load Center-Hung Replacement Arm, Cat. No. CRL8010H, is also available.

    NOTE: May require considerable alterations to retrofit. Mounting Clips are sold separately and are required to mount Closer.

    NOTE: An auxiliary floor or overhead door stop is recommended to prevent possible damage to both the door closer and entry way due to over-extension of maximum allowable door swing.

    Independent Adjustment Valves
    Non-Critical valve control adjusts both Closing Speed and Latching Speed independent of each other.

    Special Retaining Rings
    Prevent the Adjustment Valve Screws from being backed all the way out of the Door Closer Body.

    NOTE: Although A.D.A. Series Door Closers comply with A.D.A. specified opening forces, they might not provide adequate spring power to control and close the door due to varying site conditions and door size.

    Closers set to comply with A.D.A. specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. This Closer is not to be used for doors weighing in excess of 200 Lbs. (91 Kg) or wider than 36" (914 mm). Kawneer® is a registered trademark of Alcoa Inc., and its subsidiaries and affiliates.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.