C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home


View Larger Image

Catalog Number: Z710BS
Finish: BRUSHED STAINLESS


  • For 3/8" (10 mm) Glass
  • Replacement Gaskets are Available by Ordering Cat. No. Z38SG
  • For Use on Mezzanines, Partitions, Railings and Windbreaks
  • Use Monolithic Tempered Glass
  • Steel Pin Available for Additional Glass Support
  • Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)
  • Custom Painted Finishes Available Upon Request

  • This CRL Z-Series Square Type Radius Base Glass Clamp is designed to be used on glass thickness of 3/8" (10 mm). Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.



    CRL Brushed Stainless Z-Series Square Type Radius Base Stainless Steel Clamp for 3/8" Glass


     


    Other Products/Finishes/Sizes:

    CATALOG NUMBER DESCRIPTION COLOR
    Z710BS CRL Brushed Stainless Z-Series Square Type Radius Base Stainless Steel Clamp for 3/8" Glass
    Z710PS CRL Polished Stainless Z-Series Square Type Radius Base Stainless Steel Clamp for 3/8" Glass

    Catalog Number:Z710BS
    Also Available in These Catalogs:
    CRL63R Architectural Railing Systems, PAGE 272R
    CRL53R Glass & Glazing Catalog, PAGE 286G
    CRL63A Architectural Hardware Master, PAGE 615H
    CRL93G Glass and Glazing, PAGE GG075
    CRL93A Architectural Railings, PAGE HR104
    SC12 Standoff and Clamp Hardware, PAGE SC46
    AH11 Architectural Hardware Catalog 2011, PAGE Z667
    Color:Brushed Stainless
    Width:2-1/8" (54 mm)
    Height:2-9/32" (58.1 mm)
    Ship Via:Can Ship UPS
    Shipping Weight:8 oz (227g)

    For securing the Z-Clamp to thin wall tubing (less than 1/8"), use CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 1/2" (12 mm) hole, insert the riv-nut, align the clamp with the bolt and drilled hole and start threading the bolt into the nut which results in compressing the nut.

    NOTE: 1/2" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.

    SPECIFICATIONS: Glass Thicknesses: Models for 1/4" to 1/2" (6 to 12 mm).
    Base Design: Radius.
    For Use With: 2" (51 mm) Diameter Round Tubing only.
    Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
    Glass Fabrication: For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using provided steel pin for glass support. For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
    Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet.

    For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.