C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF

View Larger Image

Catalog Number: 26924P

  • Formula for Faster Curing and Higher Initial Strength

  • Meets FMVSS212/216 in as Little as 30 Minutes

  • Pre-Cured by Heat

  • CRL SikaTack®-Ultrafast II Urethane is a formula that provides faster curing with higher initial strength than the original Ultrafast Urethane. CRL SikaTack®-Ultrafast II Urethane will meet FMVSS 212/216 strength requirements in as little as 30 minutes, depending upon temperature and humidity. SikaTack®-Ultrafast II utilizes a dual curing system. The material is pre-cured by heat which gives it the unique high initial strength and unsurpassed non-sag properties. Final cure is through ambient moisture. Tensile Strength: 800 to 900 psi.

    CRL SikaTack®-UltraFast II Urethane


    Other Products/Finishes:

    26924P CRL SikaTack®-UltraFast II Urethane

    Catalog Number:26924P
    Also Available in These Catalogs:
    CRL43 Auto Glass Tools and Hardware, PAGE A116
    Tensile Strength:800 to 900 psi
    Lap Shear Strength:600 to 700 psi
    Elongation at Break
    500 to 600%
    10.1 Fl. Oz. (300 ml)
    Ship Via:Hazardous Material - No Air Shipments
    Shipping Weight:1 lb (454g)
    Case Qty:24
    Minimum Order:24 Each

    SikaTack® Ultrafast-II is packaged with 17 Sika Aktivator Pads 6H12S per case, and Aktivator Pads can be reordered separately.

    Apply Sika-Aktivator 60D960 very sparingly to the ceramic coating around the edge of the glass, if the glass is supplied without a ceramic coating, apply Sika-Primer S1KA206GP. For bonding to EDPM/PVC moldings use Sika-Primer S1KA21530. 110 VAC SOV110 and 12 VDC SikaTack® Ovens SOV12 are the recommended preheating ovens for this product.

    Minimum order of CRL SikaTack®-UltraFast is 24 each 10.1 fl oz (300 ml) cartridges.

    Once opened, cartridges should be used same day. This Urethane should not be used with primers or glass conditioners from other urethane systems. Do not store at temperatures in excess of 75°F (24°C).

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.