C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home


View Larger Image

Catalog Number: GT107
Finish: GRAY


  • Age and Weather Resistant Butyl Rubber Formula

  • 100% Solids Content

  • Meets AAMA Certification
  • Used as an Exterior Primary Spacing and Glazing Seal
  • Available in Gray and Black

  • CRL Butyl Architectural Glazing Tape is an extruded, preformed tape furnished on release paper rolls. Based on a butyl rubber formulation with proven age and weather resistant properties, it is designed to create a long lasting, flexible weather seal between two surfaces that will be subjected to normal expansion/contraction and wind loading forces. It is used as an exterior primary spacing and glazing seal when glazing glass into a window sash; also used to seal other architectural surfaces such as metal to metal joints, wood to glass, metal to plastic, etc. The thickness is designed to be compressed approximately 10 percent at installation to accommodate surface alignments.



    CRL Gray 1/16" x 1/2" Butyl Architectural Glazing Tape


     


    Other Products/Finishes/Sizes:

    CATALOG NUMBER DESCRIPTION COLOR
    GT104 CRL Black 1/16" x 3/8" Butyl Architectural Glazing Tape
    GT105 CRL Gray 1/16" x 3/8" Butyl Architectural Glazing Tape
    GT106 CRL Black 1/16" x 1/2" Butyl Architectural Glazing Tape
    GT107 CRL Gray 1/16" x 1/2" Butyl Architectural Glazing Tape
    GT204 CRL Black 1/8" x 3/8" Butyl Architectural Glazing Tape
    GT205 CRL Gray 1/8" x 3/8" Butyl Architectural Glazing Tape
    GT206 CRL Black 1/8" x 1/2" Butyl Architectural Glazing Tape
    GT207 CRL Gray 1/8" x 1/2" Butyl Architectural Glazing Tape
    GT304 CRL Black 3/16" x 3/8" Butyl Architectural Glazing Tape
    GT305 CRL Gray 3/16" x 3/8" Butyl Architectural Glazing Tape
    GT406 CRL Black 1/4" x 1/2" Butyl Architectural Glazing Tape
    GT407 CRL Gray 1/4" x 1/2" Butyl Architectural Glazing Tape

    Catalog Number:GT107
    Also Available in These Catalogs:
    CRL83R Door and Window Replacement, PAGE 867W
    CRL03 Sealants, Adhesives, and Fasteners, PAGE N168
    CRL93G Sealants and Fasteners, PAGE SF053
    Color:Gray
    Thickness:1/16" (1.6 mm)
    Width:1/2" (12.7 mm)
    Roll Length:50' (15.2 m)
    Ship Via:Can Ship UPS
    Shipping Weight:1 lb (454g)
    Case Qty:20

    Typical Properties
    Base Polymer: butyl rubber (polyisobutylene); Solids Content: 100% solids (no asbestos); Cure Time: fully cured before application; Hardness: 20 durometer Shore "A" @ 77° (25°C); Temperature Range: Application 20°F (-7°C) to 120°F (49°C); Service -40°F (-40°C) to 190°F (88°C); VOC Content: 0%; Joint Movement: ±15% of joint width; Service Life: 20 year minimum.

    Limitations
    For applications above two floors use a spacer, shim, or a structural cap bead (such as silicone) to prevent over compression or use CRL 100+ Load Bearing Glazing Tape.

    Applicable Standards
    AAMA 804.3, 806.3, and 807.3. ASTM C1281

    Good Glazing Practices
    The following "Good Glazing Practices" are recommended when using CRL Glazing Tapes. Surfaces to be adhered should be free of frost or standing water, brushed clean, solvent washed (MEK, Toluene or Naptha) and wiped dry. At installation, positive contact and approximately 10 percent compression is recommended to fully marry surfaces to be joined. Glazing tapes kept under compression with clips or wedges provide the best seals.

    Always use setting blocks (80 durometer Shore "A" hardness) placed at the sill quarter points. Spacing shims are recommended to accommodate wind loading when glass lite is over 100" (50 durometer Shore "A" hardness). Tape placement on the sill rabbet is not to be below the sight line unless a cap bead is specified, then tape is placed 3/16" (4.8 mm) below the sight line to allow for the cap bead. Do not overlap tape to join; always butt ends without stretching. To keep the tape surface clean, leave the release paper in place until ready-to-set the glass.

    Limitations: For applications above two floors use a spacer, shim, or a structural cap bead (such as silicone) to prevent over compression or use CRL 100+ Load Bearing Glazing Tape.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.