The D1950 Custom Aluminum Mirror Frame is our most popular model for a number of reasons. Its narrow 13/32" (10.5 mm) frame face allows maximum exposure of the mirror surface. The entire assembly and mounting process takes only minutes because only two extrusion components, plus screws, are needed to fabricate the frame. Plus, it's available in six attractive finishes.
By using the simple ordering guidelines below, your order can be fabricated and on its way in a few days. For additional information, contact CRL Technical Sales Department.
1. Specify Frame Model - D1950 Custom Mirror Frame; D1984 Custom Mirror Frame with shelf.
2. Specify Finish Required
A = Satin Anodized
GA = Gold Anodized
DU = Duranodic Bronze
BA = Brite Anodized
BGA = Brite Gold Anodized
FB = Flat Black Anodized
3. Specify Outside Frame Measurements, Width by Height (W x H)
NOTE: If ordering to fit stock mirror sheets, add 5/16" (7.9 mm) to the frame's width and height measurement.
4. Specify Screw Type Type "B" has screw holes on top and bottom members. Type "S" has screw holes on the sides.
NOTE: Maximum frame size is 72". For example: If width is 24" (610 mm), then height cannot exceed 48" (1.22 m); if width is 36" (914 mm), then height cannot exceed 36" (914 mm). All Custom Mirror Frame orders are non-cancelable, and may not be returned for credit.