C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home


View Larger Image

Catalog Number: EF2C


  • Allows Easy Control of Sealant Application Thickness

  • Won't Adhere to Sealants; No Bond Breaker Needed

  • Compatible with All Cold-Applied Sealants


  • CRL Closed Cell Backer Rod is a round, flexible, closed cell polyethylene foam with an exterior "skin" used as a backing and thickness control device for elastomeric and other cold-applied sealants. The Backer Rod becomes an integral part of the joint into which it is installed, and therefore is available in a range of diameters to accommodate joints from 3/16" to 1-5/8" (5 to 41 mm). It limits the depth of the sealant, thereby preventing excessive use of the sealant, which promotes proper joint design. Because the sealant will not bond to the "skin" of the rod, it can stretch and recover with joint movement, with minimal stress being put on the points of adhesion to the substrate.



    CRL 2" Closed Cell Backer Rod - 102' Box


     


    Other Products/Finishes/Sizes:

    CATALOG NUMBER DESCRIPTION
    EF14C CRL 1/4" Closed Cell Backer Rod - 100' Roll
    EF38C CRL 3/8" Closed Cell Backer Rod - 100' Roll
    EF12C CRL 1/2" Closed Cell Backer Rod - 100' Roll
    EF58C CRL 5/8" Closed Cell Backer Rod - 100' Roll
    EF34C CRL 3/4" Closed Cell Backer Rod - 100' Roll
    EF1C CRL 1" Closed Cell Backer Rod - 100' Roll
    EF114C CRL 1-1/4" Closed Cell Backer Rod - 100' Roll
    EF112C CRL 1-1/2" Closed Cell Backer Rod - 102' Box
    EF2C CRL 2" Closed Cell Backer Rod - 102' Box

    Catalog Number:EF2C
    Also Available in These Catalogs:
    AM09 Architectural Metals 2009, PAGE M286
    CRL03 Sealants, Adhesives, and Fasteners, PAGE N188
    CRL93G Sealants and Fasteners, PAGE SF030
    Rod Diameter:2" (51 mm)
    *Feet per Package:102' (31.1 m) in 72" Lengths
    Package Contents:17 ea 6' Pieces
    Ship Via:Shipped in 72" Cut Lengths
    Shipping Weight:5 lb (2.27kg)

    CRL Closed Cell Backer Rod will not absorb water or wick water to joint walls, which could cause adhesive failure. It is compatible with cold-applied sealants, and its round shape promotes the preferred "hourglass" shape for joint sealants. It withstands hot and cold temperature extremes from -45° to 160°F (-43° to 71°C).

    CRL Closed Cell Backer Rod is chemically inert, and resistant to oils, gasoline, and solvents. It will not stain or "bleed" into sealant material. Backer Rod is typically used in expansion/control joints where cold-applied sealants are used. These joints would normally be found in curtain walls, construction partitions, precast panels, parking decks, door and window frame perimeters, coping, floor and deck joints, horizontal traffic joints, and building rehabilitation projects.

    Proper size selection of CRL Closed Cell Backer Rod is important as it controls the depth of the sealant bead. It must be approximately 25% wider than the joint to fit tightly, and function as a bond breaker to prevent bottom side adhesion of the sealant. Always install using a blunt tool or roller. Cat. No. SBRR Backer Rod Roller is designed specifically for the smooth installation of all types of backer rods. NOTE: Do not tear, puncture, crease, over compress or stretch during insertion. Always use the correct size Backer Rod for the particular application. Refer to the size selection chart. Do not use with hot-applied sealants or hot melt adhesives where their surface temperature is over 160ºF (71ºC).

    NOTE: Do not tear, puncture, crease, over compress or stretch during insertion. Always use the correct size Backer Rod for the particular application. Refer to the size selection chart. Do not use with hot-applied sealants or hot melt adhesives where their surface temperature is over 160ºF (71ºC).

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.