C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home

View Larger Image

Catalog Number: 90TSX1

  • Accommodates Up to a 40" (1.02 m) Vertical Suspension from Structure

  • Provides Fine-Tune Adjustment

  • The SPS Extended Support Assembly is used when the mounting substrate is as far as 40" (1.02 m) from the top of the SPS Overhead Track. Each set consists of a steel Upper Mounting Bracket, an aluminum Lower Mounting Bracket, two 1/2"-13 x 40" (1.02 m) long Suspension Rods, a 3/8"-16 x 1-1/4" (31.7 mm) Track Mounting Bolt, nine 1/2"-13 Hex Nuts, nine Flat Washers, and five Lock Washers.

    CRL SPS Extended Support Assembly


    Other Products/Finishes/Sizes:

    90TSX1 CRL SPS Extended Support Assembly

    Catalog Number:90TSX1
    Also Available in These Catalogs:
    Ship Via:Can Ship UPS

    The Upper Mounting Bracket requires a single fastener (not supplied) to attach it to the substrate, or if mounting to steel, it can be welded. It can also be eliminated by attaching Suspension Rods directly to the steel substrate. Consult a structural engineer for recommendations.

    NOTE: When mounting substrate is over 6" (152 mm) from the top of the SPS Overhead Track, CRL Cat. No. 90TSA1 Angled Support Assemblies must be used to stabilize the entire SPS Overhead Track.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.