The Quadra-Tilt Rotator 1100 also features a dual vacuum system, 360 degree manual rotation, (re)movable pads and extension arms that accommodate a variety of load sizes and shapes.
The Dual Vacuum System features two vacuum line circuits, allowing the lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. This system is designed to reduce the risk of falling loads, which could result from breakage or other accidents that compromise one area of the vacuum system. In addition, it features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight. Complies with CE Standard EN 13155.
Standard Pad Spread:
Minimum Width: 12-1/2" (318 mm)
Maximum Width: 58-3/4" (1.49 m)
Minimum Length: 46-3/4" (1.19 m)
Maximum Length: 104-1/2" (2.65 m)
Number/Size of Pads: 6/11" (280 mm) Diameter Lipped
Lifting Capacity*: 1100 Lbs. (500 kg)
Per-Pad Capacity*: 184 Lbs. (84 kg)
(*On Smooth, non-porous surfaces. Please contact us for recommendations on other surfaces.)
Unit Weight: 188 Lbs. (86 kg)
Standard Operating Power: 12V DC, 10 AMP
Load Movement: Manual rotation, 360 degree edgewise, with automatic locking at each 1/4 revolution. Assisted manual tilt, 90 degree between upright and flat.
Dual Vacuum System
Low Vacuum Warning Light and Buzzer
On-board Battery and Charger
Battery Energy Gauge
Vacuum Line Filter
Vacuum Reserve Tank
(Re)movable Pad Mounts
Remote Control System Cat. No. E08RC
Tilt Locks Cat. No. LB8TL0
Heavy-Duty Transport Case
In addition to DC power and a dual vacuum system, this Powr-Grip® Rotator/Tilter features a highly adaptable pad frame and a remarkably low profile, for maximum flexibility in handling loads between buildings and scaffolding or similar tight work locations.
CRL offers large Power Lifting Frames on a week to week rental basis. Customers are responsible for all common carrier freight charges and may require to provide a security deposit. Usage time is based on a one week minimum and begins on the day the frame arrives at the customer. Rental billing ends on the day the frame is shipped back to the originating point. Billing is for full weeks only, no partial weeks. For details, availability and actual pricing please contact our Technical Sales Department.