C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home



Catalog Number: 2108X9


  • Structural Glazing Spacer for Field and Shop Glazing

  • Superb Spacer for Two and Four Sided Structural Silicone Glazing Systems

  • Chemically Compatible with All Silicones Tested


  • CRL Structural Spacer Tape is a semi-rigid foam tape with an aggressive pressure-sensitive adhesive. This high density tape has a specially formulated cellular substrate, and is used as a spacer for joint dimension control in structural silicone glazing systems. It is the most widely used spacer tape for structural silicone systems. The tape has proven to be compatible with all commercial silicone sealants used for structural glazing. It has a highly aggressive adhesive on both sides, and a semi-rigid, open cell structure that maintains the required spacing, and allows air and moisture to reach the silicone to allow optimum curing. Its low conductivity reduces heat transfer and inhibits condensation on windows, doors and metal systems. It comes only in an architectural black finish, and five stock sizes. Other sizes may be available on special order.



    CRL 6 x 9 mm Structural Glazing Spacer Tape


     


    Other Products/Finishes/Sizes:

    Catalog Number:2108X9
    Also Available in These Catalogs:
    This item is currently only available in Australia and surrounding areas
    Thickness of Tape:1/4" (6 mm)
    Width of Tape:3/8" (9 mm)
    Feet per Roll:50' (15 m)
    Ship Via:Can Ship UPS
    Shipping Weight:1 lb (454g)
    Case Qty:40

    This tape is designed: as a spacer for glass, metal, stone, mineral cement and plastic panels in structural silicone glazing systems, including two-and four-sided structural silicone glazing of curtain walls, storefronts, skylights and windows; to temporarily secure glazing or panels to framework in shop fabrication of unitized structural silicone glazing and cladding systems; to temporarily secure lightweight veneers to substrates while permanent structural silicone adhesives are curing; as a thermal break to reduce the conduction of heat; to provide an even sight line in vision areas.

    Recommended application temperatures range from 60°F (15°C) to 125°F (52°C). Contact surfaces must be thoroughly cleaned. Position the tape carefully, as it cannot be repositioned after initial contact. Store at room temperature.


    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.