C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home

View Larger Image

Catalog Number: TTW366

  • Standard Heated Detergent Recirculation

  • Standard Recirculating Miser Rinse

  • Standard Final Rinse Solenoid Water Saver
  • Fastest Standard Glass Washers Available

  • CRL's Horizontal Glass Washers have the latest design features. Our six brush glass washing machine's processing speed has been increased up to 35' per minute. We can fabricate machines to process at any speed you need. The horizontal glass washers have a tilt-top design. The top will tilt from either end and can be supplied with an optional hydraulic lifting device. In fact, the top can be lifted straight off with an overhead crane. Access to the inside of the machine is important to perform maintenance on spray nozzles, or replace brushes.

    CRL 36" Six Brush Glass Tilt-Top Glass Washing Machine


    Other Products/Finishes/Sizes:

    TTW366 CRL 36" Six Brush Glass Tilt-Top Glass Washing Machine

    Catalog Number:TTW366
    Also Available in These Catalogs:
    CRL73R Tools, Machinery, and Equipment, PAGE 687K
    GMB15 Glass Machinery Brochure, PAGE MB05
    Main Body:81” x 64” x 45” (2.06 x 1.63 x 1.14 m)
    F.O.B :Cicero, Il.
    Shipping Weight:1980 lb (898.11kg)

    The corrosion resistance of horizontal machines has been enhanced by adding stainless steel to the spray compartment walls and to the brush and roller journals. We also use non-corrosive re-circulating pumps, and have located all bearings outside the wet area.

    To enhance the drying capability, the air blast drying system has been completely redesigned. As a result, glass can be loaded on the conveyor in a squared position, and dried. Some competitive washers require the glass be loaded on the conveyor in a diagonal position so the trailing edge can be dried.

    Capacity: Accepts glass in any shape with a single dimension of 5-1/2" (139.7 mm) from 0.050" to 1/4" (1.27 to 6.4 mm). Variable line speed is 5' to 35' (1.5 to 10.7 m) per minute.

    Brushes: Brushes are 3-1/2" diameter x 37" (89 x 940 mm) long with spiral wound bristles. Brush height is adjustable and they are V-belt driven.

    Drying System: Air blast drying system uses 10HP pressure blower. It pressurizes plant air and forces it through top and bottom blast tubes to dry both surfaces of the glass. The baffled enclosure covered drying system reduces noise.

    Rollers: Solid rubber covered conveyor feed and pinch rollers throughout machine.

    Bearings: Heavy Duty bearing units insure long life and are readily available for easy replacement.

    Frame: Frame is a steel weldment, consisting of an entry conveyor section, main washing section, and an exit conveyor section. Tilt-top design for easy maintenance.

    Electrical: Control panel is built to NEMA 12 specifications to meet OSHA requirements. Every panel is UL approved. Power requirements are 3 phase, 60 cycle, 208, 230, and 460 volt. International voltages are available in special order.

    Water: One spray pipe per brush applies the detergent solution or water. Threaded pipe plug ends allow easy cleaning. Water consumption with miser rinse is about 1.6 GPM.(6 LPM). Plant water connection is 1/2" NPT.

    Options: Hydraulic power tilt(TTW36HP), de-ionized water protection package (TTW36D1R) and an induction static eliminator (TTW36SE)are all available.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.