You will be pleased with the superior performance of our 4" x 132" (102 mm x 3.35 m) Upright Wet Abrasive Belt Sander, and the years of dependable service it will give you. F.O.B. Local CRL service center. Must ship common carrier.
CAUTION: When grinding, always wear protective safety glasses and an approved glass dust respirator. One of each is provided with the machine.
ABRASIVE BELTS: These machines use standard 4" x 132" (102 x 3.35 m) abrasive belts. One 120 grit belt, one pair of safety glasses, and one approved respirator are furnished with each machine. A safety shield is mounted to the hood.
MOTOR AND STARTER: A 1 HP, 3450 RPM motor, with V-Belt drive, provides all the power for normal usage. The motor is three phase, 60 Hz, 220 or 440 Volts. It is wired to a manual push button starter. Please specify power requirements.
PULLEYS: Both pulleys are 8" (203 mm) diameter, and made of machined and balanced cast iron.
BELT TENSION DEVICE: Eccentric type with locking handle and control knob for tracking the belt.
BEARINGS: Standard ball bearings are used throughout the drive system.
COOLANT SYSTEM: A water supply line with an electrical solenoid control valve and a low water consumption spray nozzle (3.5 gph @ 30 psi) are included for wet grinding.