C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home

View Larger Image

Catalog Number: 5285GL
Finish: GRAY

  • Use for Steel, Aluminum, or Galvanized Window Sash

  • Apply Smoothly without Priming

  • Made expressly for glazing in steel, aluminum or galvanized window sash. CRL Metal Sash Putty is made to apply smoothly, without priming. The gray color blends with the metal finish.

    CRL Gray Metal Sash Putty - 5 Gallon


    Other Products/Finishes/Sizes:

    528HP CRL Gray Metal Sash Putty - Half Pint
    528QT CRL Gray Metal Sash Putty - Quart
    528GL CRL Gray Metal Sash Putty - Gallon
    5283GL CRL Gray Metal Sash Putty - 3 Gallon
    5285GL CRL Gray Metal Sash Putty - 5 Gallon

    Catalog Number:5285GL
    Also Available in These Catalogs:
    CRL83R Door and Window Replacement, PAGE 872W
    CRL03 Sealants, Adhesives, and Fasteners, PAGE N180
    CRL93G Sealants and Fasteners, PAGE SF040
    Size:5 Gallons (19 l)
    Ship Via:Can Ship UPS
    Shipping Weight:83 lb (37.65kg)

    Surfaces should be clean, dry, and free of frost. When re-glazing, remove all old putty and bedding. If necessary, place glazing in hands and roll into coils to warm and soften. Smooth glazing to an angle that sheets water. Typical dry time before painting is four to six weeks, depending on temperature and humidity. Putty must be painted after it has skinned over and attained a firm set. For best results, use a high quality oil-based paint.

    Technical Data: Meets the requirements of Federal Specification TT-G-410E; ASTM C 669-75, C669, D2249, D2376, C797.

    Important Note: Do not thin putty. At no time should any solvents or any type of oils be added. In addition, the putty cannot be tinted or colored by adding color pigments. Mixing Instructions: Mix the ENTIRE contents of the container prior to use. Empty the ENTIRE container onto a piece of glass or a plastic surface and mix the oils into the putty until a uniform mixture is produced. DO NOT mix small amounts at a time. Mixing small amounts of putty will result in handfuls of putty that are either too dry, or contain too much oil. DO NOT mix on cardboard, as the cardboard will absorb useful oils. Check Spec Data sheet for additional application guidelines and limitations.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.