C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF

View Larger Image

Catalog Number: 533HPW

  • Glazes Wood, Metal, and Aluminum Sash

  • Ideal for Over-The-Counter Sales

  • Available in Two Colors

  • Apply CRL All Purpose Putty in most any glazing application to wood, steel, and aluminum sash. Its special formulation adheres firmly to sash and glass, and outlasts ordinary putties.

    CRL Off-White All Purpose Putty - Half Pint


    Other Products/Finishes:

    533HPGRY CRL Gray All Purpose Putty - Half Pint
    533QTGRY CRL Gray All Purpose Putty - Quart
    533GLGRY CRL Gray All Purpose Putty - Gallon
    5333GLGRY CRL Gray All Purpose Putty - 3 Gallons
    5335GLGRY CRL Gray All Purpose Putty - 5 Gallons
    533HPW CRL Off-White All Purpose Putty - Half Pint
    533QTW CRL Off-White All Purpose Putty - Quart
    533GLW CRL Off-White All Purpose Putty - Gallon
    5333GLW CRL Off-White All Purpose Putty - 3 Gallons
    5335GLW CRL Off-White All Purpose Putty - 5 Gallons

    Catalog Number:533HPW
    Also Available in These Catalogs:
    CRL83R Door and Window Replacement, PAGE 872W
    CRL03 Sealants, Adhesives, and Fasteners, PAGE N180
    Size:Half Pint (237 ml)
    Ship Via:Can Ship UPS
    Shipping Weight:2 lb (907g)
    Case Qty:24
    Minimum Order:1 Each

    Surfaces should be clean, dry, and free of frost. When re-glazing, remove all old putty and bedding. If necessary, place glazing in hands and roll into coils to warm and soften. Smooth glazing to an angle that sheets water. Typical dry time before painting is four to six weeks, depending on temperature and humidity. Putty must be painted after it has skinned over and attained a firm set. For best results, use a high quality oil-based paint. Both gray and off-white colors come in factory sealed plastic containers that preserve freshness and shelf life. CRL All Purpose Putty is attractively labeled for over-the-counter retail sales in your choice of five sizes.

    Technical Data: Meets the requirements of Federal Specification TT-G-410E; ASTM C 669-75, C669, D2249, D2376, C797.

    Important Note: Do not thin putty. At no time should any solvents or any type of oils be added. In addition, the putty cannot be tinted or colored by adding color pigments. Mixing Instructions: Mix the ENTIRE contents of the container prior to use. Empty the ENTIRE container onto a piece of glass or a plastic surface and mix the oils into the putty until a uniform mixture is produced. DO NOT mix small amounts at a time. Mixing small amounts of putty will result in handfuls of putty that are either too dry, or contain too much oil. DO NOT mix on cardboard, as the cardboard will absorb useful oils. Check Spec Data sheet for additional application guidelines and limitations.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.