C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home

View Larger Image

Catalog Number: 1214006

  • Universal Primer Required for a Secure Bond

  • Use on Glass, Pinchweld, Bare Metal, EPDM/PVC Moldings

  • Part of the LYNX Services Program
  • Guide to Proper Installations

  • CRL One Step Primer chemically reacts with the glass frit and urethane to provide a secure bond. Clean new glass first with Cat. No. PWR22 Automotive Glass Cleaner, and then apply One Step Primer to the frit with a lint-free wipe. Apply One Step Primer to bare pinchweld metal scratches or rust areas that have been properly repaired prior to priming. May also be used on glass supplied without black ceramic frit to improve adhesion.

    CRL One Step Primer for CRL Series Urethanes


    Other Products/Finishes/Sizes:

    1214006 CRL One Step Primer for CRL Series Urethanes

    Catalog Number:1214006
    Also Available in These Catalogs:
    TV12A Truck & Van Accents 2011, PAGE AC45
    CRL93G Automotive Products, PAGE AU002
    CRL03 Sealants, Adhesives, and Fasteners, PAGE N483
    Contents:4.2 fl. oz. (125 ml)
    Shelf Life:16 Months in Unopened Container
    Shelf Life
    Lynx Test:
    5 Days After Opening Container and Re-Sealing After Each Use
    Click Here
    Ship Via:Hazardous Material - No Air Shipments
    Shipping Weight:8 oz (227g)
    Case Qty:6

    Cleaning and Primers:

    1. After removing all of the old urethane to within 1/16" (1.5 mm) of the pinchweld, prepare the pinchweld following the procedures outlined in the CRL Technicians Training Manual. Prime these areas with Cat. No. 1214006 One Step Primer.

    2. Clean the inside of the windshield with a lint-free towel Cat. No. 1550 and Cat. No. PWR22 Automotive Glass Cleaner.

    3. Apply Cat. No. 1214006 One Step Primer to frit area with a lint-free towel and allow primer to dry for a minimum of 10 minutes, but no more than 8 hours before installing adhesive. This procedure must be performed above 40°F (4°C).

    NOTE: One Step Primer must be used prior to any adhesive application to prevent glass displacement. Failure to do so may result in personal injury or property damage.

    4. Apply Cat. No. 1214006 One Step Primer to encapsulated moldings if they are part of the bonding area.

    For use by trained installers only. Please refer to CRL Technician Training Manual, Technical Spec Data Sheet and Material Safety Data Sheet before using product. Do not use if primer is gelled.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.