C.R. Laurence Co., Inc.
Sign OnSign Off  |  Your Account  |  View Cart  |  Help  |  Home

Catalog Number: AUMT4FS818DC

  • Can be Configured up to 184-1/4" (4.68 m) in Length to Lift Long Cladding Materials

  • Load Capacity: Maximum 320 kg (700 lbs.)

  • Charger Operates on 240 Volts AC

  • This CRL Wood's 700 Series Cladding Lifter is a versatile, DC-powered manual tilter that features a dual vacuum system and can be configured up to 184-1/4" (4.68 m) in length to lift long cladding materials weighing up to 700 pounds (320 kg).

    CRL Wood's 700 Series Cladding Lifter - Australia Only


    Other Products/Finishes:

    MT4FS818DCS CRL Wood's 700 Series Cladding Lifter

    Catalog Number:AUMT4FS818DC
    Also Available in These Catalogs:
    This item is currently only available in Australia and surrounding areas
    Ship Via:No UPS - Common Carrier Only
    Shipping Weight:245 lb (111.13kg)

    Standard Vacuum Pad Spread:
    Minimum Width - 18-1/2" (468 mm)
    Maximum Width - 44-1/4" (1.13 m)
    Minimum Length - 19" (480 mm)
    Maximum Length - 44-3/4" (1.14 m)

    (Optional pad frame extensions can be added to increase overall length to 184-1/4" (4.68 m).

    Number/Size of Vacuum Pads:
    4 each, 8-1/2" x 18-1/2" (213 x 467 mm) vacuum pads

    Load Capacity*:
    Maximum - 700 pounds (320 kg)
    Per-Pad - 175 pounds (80 kg)
    *On non-porous surfaces with up to 3/8" (10 mm) relief.

    Standard Operating Power:
    12 volts DC, 22 amps

    Standard Charger Input Voltage:
    240 volts AC (Other voltages available)

    Load Movement:
    Manual tilt, 90º between upright and flat, with hydraulic damping and automatic latching in the upright and flat positions (when desired).

    Standard Features:
    Dual vacuum system
    Low vacuum warning buzzer
    Green lift light
    On-board battery and charger
    Battery energy gauge
    Vacuum gauges
    Vacuum line filters
    Vacuum reserve tanks
    Spring-mounted vacuum pads
    Re-movable, 90º rotating vacuum pad mounts.
    Closed cell foam pads, for surface contours up to 3/8" (10 mm) in depth.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.