Standard Pad Spread:
Cat. No. P2110445DC: 51" x 54-1/4" (1.30 x 1.38 m)
Cat. No. P2HV110445DC: 50" x 53-1/4" (1.27 x 1.35 m)
Number/Size of Pads:
Cat. No. P2110445DC: 8/11" (280 mm) Diameter Lipped
Cat. No. P2HV110445DC: 8/10" (254 mm) Diameter Lipped
Lifting Capacity:
Cat. No. P2110445DC: 1,400 Lbs. (635 kg)
Cat. No. P2HV110445DC: 1,200 Lbs. (545 kg)
(on smooth, non-porous surfaces. Call for recommendations on other surfaces.)
Average Unit Weight: 171 Lbs. (78 kg)
Standard Operating Power: 12V DC, 10 AMP (for each Pad Channel).
Load Movement: Manual rotation, 180º edgewise, with locking in three positions. Manual tilt, 90º between upright and flat, with automatic latching in upright position. (Units can be tilted ONLY when the lift bar is locked in the center position, as shown in drawings.)
Standard Features:
On-Board Battery and Charger
Battery Energy Gauge
Low Vacuum Warning Light
Vacuum Gauge
Vacuum Line Filter
Vacuum Reserve Tank
AVAILABLE OPTIONS:
For All P2 Series Channel Lifters:
AC Power System
Cat. No. P2110445AC
Cat. No. P2HV110445AC
Cat. No. P211047AC
Cat. No. P2HV11047AC
Remote Control System Cat. No. E08RC
Removable Control Pendant Cat. No. E09RP
Dual Vacuum System Cat. No. E010DVS
Individual Pad Shutoffs Cat. No. CM1C0WB
Closed Cell Foam Pad Rings Cat. No. FRHV11 (available on P2HV1104 units only.)
Counter-Balancer Cat. No. CB1S
COMPONENTS:
Pad Channels:
Each channel features an independent, on-board vacuum generating system, including vacuum pump, vacuum controls and standard features as listed above.
Cat. No. PC1104 (for Flat Materials): 4/11" (280 mm) Diameter Lipped Pads
Cat. No. PC1004 (for Curved Materials): 4/10" (254 mm) Diameter Concaved Pads
Cat. No. PCHV1104 (for Rough Materials): 4/10" (254 mm) Diameter Lipped Pads Lift Frames
Cat. No. PCFT1A1: For One Pad Channel
Cat. No. PCFT2SA45: For Two Pad Channels, Approx. 4-1/2' (1.38 m) Pad Spread
Cat. No. PCFT2SA7: For Two Pad Channels, Approx. 7' (2.14 m) Pad Spread Interchangeable Arms (Pad spread can be changed if optional arms are purchased.)
Cat. No. FA245: Optional Arms Convert PCFT2SA7 Lift Frame to PCFT2SA45 Lift Frame
Cat. No. FA27: Optional Arms Convert PCFT2SA45 Lift Frame to PCFT2SA7 Lift Frame