Channel Lifters are comprised of one or more Pad Channels and interchangeable Lift Frames for manually rotating and tilting materials. These vacuum lifters may be ordered as complete units or as individual components to expand existing Channel Lifter systems. Lift Frames are available in single-channel or double-channel styles. Pad Channels can be switched from one frame to another in minutes.

Specifications:
Standard Vacuum Pad Spread:
51" x 54-1/4" (1.30 x 1.38 m)

Number/Size of Vacuum Pads:
8/11" (280 mm) diameter lipped vacuum pads

Load Capacity*:
1400 lbs (635 kg)
(*On smooth, non-porous surfaces. Please contact us for recommendations on other surfaces.)

Average Weight of Vacuum Lifter:
171 lbs (78 kg)

Standard Operating Power:
12 volts AC, 10 amps (for each Pad Channel)

Load Movement:
Manual rotation, 180 degree edgewise, with locking in three positions.
Manual tilt, 90 degree between upright and flat, with automatic latching in upright position
(Lifters can be tilted ONLY when lift bar is locked in center position.)

Standard Features*:
On-board battery and charger
Battery energy gauge
Low vacuum warning light
Vacuum gauge
Vacuum line filter
Vacuum reserve tank
(*On each Pad Channel)


Available Components:
Pad Channels: Each channel features an independent, on-board vacuum generating system,
including vacuum pump, vacuum controls and all standard features listed above.

Available Options:
Dual vacuum system
AC power system
(Specifications may not be as listed above. Please contact us for more information.)
Movable control pendant
Remote control system
Individual vacuum pad shutoffs
Closed cell foam vacuum pad rings
(Available on P2HV1104 lifters only)
Counter-Balancer

Design Standards:
ASME B30.20-2006
(BTH-1 Design Category "B", Service Class "0")
CE AS 4991-2004