The Elite Hinge comes in two types: The Self-Centering assists in centering the door within 15° of the closed position; the Self-Closing is spring loaded and will return the door to the closed position from any point.
Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud that eliminates slippage. The Elite Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5 degree offset door closure. A Custom Pivot Pin is available for "off-angle" installations.
Standard Reversible Pivot Pin:
Each Elite Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 degree. The opposite side is marked 85 degree. Standard Elite Hinges come with the 90 degree side activated.
Custom Pivot Pin:
Custom Pivot Pins (Cat. No. GENP1N
) are available to accommodate "off-angle" installations. If the Standard 5° Reversible Pivot Pin
contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree). If using the Custom Pivot Pin, contact our Technical Sales Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin.
Glass Thickness: 3/8" to 1/2" (10 to 12 mm) Tempered Safety Glass Special Feature: Elite has the ability to be side mounted at the top and bottom corners of the door, or anywhere in-between. Corner mounting allows more glass exposure Construction: Solid Brass Hinge Swings: 90 degree in and 90 degree out Closing Type: Self-Centering when within 15 degree of closed position Cut-Out and Hole Required Includes: One Hinge, Gaskets, Screws and Template
Custom finishes are available on request. Contact the CRL Technical Sales Department.