C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF

View Larger Image

Catalog Number: UV91111

  • 4-1/2" (114 mm) Vacuum Cup with 9" (229 mm) Long Clamping Bar

  • Perfect for Aligning Adjacent Shower Enclosure Panels
  • Bar Adjusts 5-3/4" (146 mm) Side-to-Side
  • Two Threaded Clamp Knobs

  • The CRL Third Hand Fixation Device is the perfect solution for applying the pressure needed to bond UV and shower door hardware in place during heating and curing. The adjustable steel sliding bracket allows for precise positioning of clamp tips over your hardware. The clamp screws can accommodate knobs or bars exceeding 2" (51 mm) in height. Simply attach the 4-1/2" (114 mm) pump action vacuum cup within 2" or 3" (51 to 76 mm) of the hardware mounting point, adjust the clamp bar to center a clamp tip over the hardware, and screw one of the clamps down to secure the hardware in place. For added pressure when working with higher viscosity adhesives, lower the second clamp tip down onto the surface and tighten. Using the vacuum cup as a fulcrum in this way helps to force air bubbles out of adhesive and create the tightest possible gap to enhance adhesive performance. The CRL Third Hand Fixation Device can also be used to hold automotive trims and moldings in place while the adhesive cures.

    CRL Third Hand Fixation Device


    Other Products/Finishes:

    UV91111 CRL Third Hand Fixation Device

    Catalog Number:UV91111
    Also Available in These Catalogs:
    CRL73R Tools, Machinery, and Equipment, PAGE 338K
    CRL23R Frameless Shower Door and Mirror Hardware, PAGE 505J
    CRL03 Sealants, Adhesives, and Fasteners, PAGE N406
    ST14 Frameless Shower Doors Installation Tools, PAGE ST06
    Ship Via:Can Ship UPS
    Shipping Weight:2 lb (907g)
    WARNING:This product can expose you to LEAD, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

    No additional product information available at this time.

    The UV91111 is assembled using a pump style vacuum cup base. The plunger on this cup features a red safety ring. When this ring appears cup should be re-attached or re-pumped to recreate vacuum. Always use caution when handling the vacuum pad and store with the pad cover in place to avoid damage.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.