This device is supplied standard with a 48" crossbar for use with doors up to 48" wide. The customer can cut the bar to exact length needed. For Locking Outside Entry: Use 8500LV02313 Locking Lever Trim or Cylinder Only: Use DL2170 OR DRA50 Type Mortise Cylinder with MS Cam - Will Require use of 3089610958313 Cylinder Mounting Pad. Panic Ships Standard for use with 7/0 (84") doors. Taller doors require use of Extension No. 301347 Top Rod Extender in 12" increments.
Added features include: Nylon bushings at arm pins; contoured cross bar; and adjustable strikes. The body and arm are available in high tensile strength aluminum with an extruded aluminum cross bar. Internal parts are made of a special plated alloy.
The standard 48" (1.22 m) width will fit most doors. For narrower doors, simply cut the bar to fit. Baked acrylic coated satin finish aluminum or standard bronze hardware finishes are available.
If you would like to add a keyed cylinder order a DL911SCKDA
Rim Cylinder and two 1224X112FMS
longer screws for installation. A Cylinder Mounting pad is not required. Doors requiring keyed entrance, must use a standard Mortise Cylinder with a "MS" type cam DL2170
with a #86 Mortise Cylinder Mounting Pad
. Device is Non-handed and Actuator Link can be placed on either side.
For additional information, contact CRL Technical Sales