C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF

View Larger Image

Catalog Number: B5T10D6
Finish: MILL

  • For 1/2" (12 mm) Monolithic Tempered Glass
  • Works with TL5X10 TAPER-LOC®'X' Taper S
  • Typically Used as the Base Channel for
    Glass Railing Systems Requiring
    a Flush Installation Embedded in Concrete
  • Drilled and Counter Bored 6" (152 mm)
    Center-to-Center, or We Will Custom Drill
    to Your Specifications
  • Custom Cutting and Mitering Service
  • Test Reports Available
  • CRL Glass Railing Systems Meets
    NBC Load Requirements When Installed
    in Accordance to ICC-3269

  • The CRL B5T Tapered Base Shoe is typically used as the base channel for glass railing systems. It can be clad in six choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered and tested a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.

    CRL Mill Aluminum Tapered Base Shoe Drilled With Hole Pattern D in a 10' Length


    Other Products/Finishes:

    B5T10 CRL Mill Aluminum Tapered Base Shoe Undrilled in a 10' Length
    B5T10D CRL Mill Aluminum Tapered Base Shoe Drilled with Hole Pattern D in a 10' Length
    B5T10D6 CRL Mill Aluminum Tapered Base Shoe Drilled With Hole Pattern D in a 10' Length

    Catalog Number:B5T10D6
    Also Available in These Catalogs:
    CRL63R Architectural Railing Systems, PAGE 134R
    HR18 Architectural Railing Systems 2018, PAGE 150B
    CRL53R Glass & Glazing Catalog, PAGE 569G
    CRL93A Architectural Railings, PAGE HR024
    Stock Length:120" (3.05 m)
    Hole Size:9/16" (14.3 mm)
    Counter Bore x Depth
    Holes Drilled C.T.C.:
    7/8" (22 mm) x 1/2" (12.7 mm)
    6" (152 mm)
    Ship Via:No UPS - Common Carrier Only
    Shipping Weight:56 lb (25.4kg)
    Minimum Order:1 Each

    1/2" (12 mm) Thick Glass when using TAPER-LOC™ Dry Glaze System; 1/2" (12 mm) to 5/8" (16 mm) Thick Glass when using Wet Glaze System.

    CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method. All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.