C.R. Laurence Co., Inc.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF

View Larger Image

Catalog Number: SR4TDU34240

  • Reversible Extruded Saddle to Match 1/4" or 3/4" (6 or 19 mm) Door Clearances

  • Provides Even Sightline With Our Door Rails

  • Vinyl Provided to Use with 3/4" (19 mm) Glass; Vinyl for 5/8" (16 mm) Glass Ordered Separately
  • Ready-to-Ship Models From CRL Inventory
  • Use Monolithic Tempered Glass
  • Matching Door Rails Available for an Even Sightline

  • The CRL 4" (102 mm) Tapered Sidelite Rail is commonly used in office and storefront applications to secure fixed glass panels. Since the profile matches our Door Rails, these Sidelite Rails can be used top and bottom for a matching look, or with a variety of smaller configuration U-Channels. Glass is installed easily with the 'lift and drop' method using our 4" (102 mm) Aluminum and Neoprene Setting Blocks. Glass is secured with a Top Load EPDM Roll-in Glazing Gasket that eliminates the messy application of silicone sealant. Also available in this size are our 4" (102 mm) Square Sidelite Rails to match our Square Door Rails.

    CRL Black Bronze Anodized 4" x 240" Length Tapered Sidelite Rail


    Other Products/Finishes:

    SR4TDU34240 CRL Black Bronze Anodized 4" x 240" Length Tapered Sidelite Rail
    SR4TSA34240 CRL Satin Anodized 4" x 240" Length Tapered Sidelite Rail

    Catalog Number:SR4TDU34240
    Also Available in These Catalogs:
    CRL63A Architectural Hardware Master, PAGE 148H
    AH18 Architectural Hardware Catalog 2018, PAGE 148Z
    CRL93A Architectural Hardware, PAGE CH036
    Color:Black Bronze
    Length:240" (6.10 m)
    Ship Via:No UPS - Common Carrier Only
    Shipping Weight:35 lb (15.88kg)
    Minimum Order:1 Stock Length

    Available in several finishes in 120" (3.05 m) lengths and in extra long 240" (6.10 m) lengths, they match heights to both floor mounted and 1/2" (13 mm) threshold doors using our Reversible Saddle. Use the Sidelite Rails alone for your upper rails, and with our Aluminum Neoprene Setting Blocks, lifting the glass into the upper rail and lowering into the bottom rail. This will give you a 9/16" (14 mm) glass retention in both the top and bottom channels. Complete the job by installing the Roll-In EPDM Gaskets and matching finish End Caps.

    • Sidelite Rails on this page come with vinyl to glaze 3/4" (19 mm) glass. If using 5/8" (16 mm) glass, GGT38 Series Vinyl must be ordered separately.
    • All models are available in 120" (3.05 m) lengths. Selected finishes are also offered in 240" (6.10 m) lengths.
    • Custom lengths and finishes are also available.
    • SREC4T Series End Caps and Cat. No. UCSB4 Setting Blocks must be ordered separately.

    Shown with End Caps which must be ordered separately. Stainless Steel Cladded Aluminum and cannot be cut with a standard chop saw or abrasive blade. These will cause the Cladding to heat up and burn the finish. This material must be cut with a cold saw to prevent damage to the finish. For further information please contact Technical Sales.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.